Axis USB Wireless G Uživatelský manuál stáhnout pdf (Strana 29)

Print Server Management

AXIS OfficeBasic USB Wireless G 29

Perform a Factory Default:

1. Verify that the DIP switch is on “Nor.”

2. Disconnect the external power supply.

3. Hold down the reset button.

4. Reconnect the external power supply. Wait for 5 seconds, and release the

button.

5. Release the reset button.

6. The print server will restart.

Important!

• Performing a Factory Default will erase all settings of the print server to

default and should be performed with caution!

• After performing a Factory Default, the default wireless settings will be:

• Infrastructure mode

• SSID = <ANY> (will connect with the Access Point that has the best

signal in your wireless network)

• Data transmit rate = Auto

• Transmit mode = Auto

• Authentication Type = Open System

•Channel = 6

•DHCP enabled

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

Žádné komentáře

Axis USB Wireless G Uživatelský manuál Strana 29