Axis P3367-VE Uživatelský manuál stáhnout pdf (Strana 31)

AXIS P3367–VE Fixed Dome Network Camera

Events

The Axis product can be conﬁgured to perform actions w hen different events occur, for example , start a recording when motion is

detected. The set of conditions that deﬁnes how and when the action is triggered is called an Action Rule. The action rule will apply

at speciﬁc periods called Schedules. It is possible to specify how often the action rule will recur. This is called Recurrences.

Available Action Rule triggers include:

• Detectors, for example audio detection and motion detection

• Hardware — if the temperature falls outside the operating range of the product

• Input Signal — when the product’s I/O port receives a signal from an external device, such as a smoke detector or switch

• PTZ — when the product’s pan/tilt/zoom controls are activated or when the vie w stops at a preset position

• Storage — when a storage device is available, locked or full

• System — when the pro duct is started

•Time,seeRecurrences, on page 32

Possible actions include:

• Day/Night Vision Mode

• Output Port — activate an output to, for example, sound an alarm or lock a door

• Play Audio Clip

•PTZControl

• Record Video — record video and save to a selected storage

•SendImagesandNotiﬁcatio ns — once recipients have been set up, a notiﬁ cation can be sent that an event has occurred

•StatusLED

Setting up an Action Rule

An action rule deﬁnes the conditions that must be met for the product to perform an action, for example record video or send email

notiﬁcations. If mult

iple conditions are de ﬁned, all must be met to trigger the action.

The following ex

ample describes how to set up an action rule to send an email if there is m ovement in the product’s ﬁeld of view:

1. Go to Eve

nts > Action Rules and click Add.

2. Sel

ect the Enable rule option and enter a descriptive name for the rule.

3. Select Detectors from the Trigger drop-down list.

4. Select Motion Detection from the drop-down list.

5. Set one of the available pre-programmed time intervals from the Schedule drop-down list.

6. Select Send Notiﬁcation from the Type drop-down list.

7. Select where to send the notiﬁcation from the Recipient drop-down list.

To add additional criteria, select the Additional conditions option. Add and select the desired options as described above.

To copy, modify or remove an action rule, select the action rule in the Action Rule List and click Copy, Modify or Remove.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Žádné komentáře

Axis P3367-VE Uživatelský manuál Strana 31