Axis 640 series Uživatelský manuál stáhnout pdf (Strana 35)

NetWare

UNIX

Windows

OS/2

Macintosh

AXIS 540/640 User’s Manual Section 3: Basic Installation

Using DHCP Follow the instructions below to download the IP address using

DHCP:

1. Edit or create a scope in the DHCP manager of the DHCP

daemon. The entries included in this scope should contain the

following parameters:

• range of IP addresses

• subnet mask

• default router IP address

• WINS server IP address(es) or DDNS server IP address(es)

• lease duration

2. Activate the scope.

The AXIS 540/640 automatically downloads the DHCP parameters.

If you are using WINS or DDNS, you should include at least one

WINS or DDNS server IP address in the DHCP scope. Immediately

after the IP address has been received, the AXIS 540/640 registers its

host name and IP address on the WINS alternatively DDNS server.

Refer to Registering and Resolving Host Names, on page 33 for more

information.

The AXIS 540/640 can automatically download a customized config

file from a TFTP server. Just add the name of the config file and the

TFTP server’s IP address to your DHCP scope. The config file is

downloaded immediately after the AXIS 540/640 receives its IP

address.

Note: ❏ You do not have to restart the AXIS 540/640 to download the IP

address.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 166 167

Žádné komentáře

Axis 640 series Uživatelský manuál Strana 35