Axis 540 Series Uživatelský manuál stáhnout pdf (Strana 13)

Basic Installation

AXIS 540+ / AXIS 560 User’s Manual 13

Section 3 Basic Installation

Quick overview

Follow these steps to make your printer network ready:

1. Connect the Hardware, on page 13

2. Assign an IP Address to the Print Server, on page 14

3. Making Network Printers available for printing on your PC, on page 18

Connect the Hardware

1. Make sure that the printer is switched off and that the Power Adapter is

disconnected

from the print server.

2. Locate the serial number, found on the underside label of the print server,

and write it down. Example: S/N: 00408c181cf0

3. Connect the printer directly to a port on the print server or using an

appropriate cable.

4. Connect the AXIS 540+/AXIS 560 to your network (Ethernet Connector).

5. Switch on the printer and make sure it is ready for printing (display showing

“Online”, “Ready”, etc.)

6. Connect the Power Adapter to the print server. The Network Indicator will

start flashing when the print server is correctly connected to the network.

7. Wait 1 minute and press the test button once. A test page will be printed

on the connected printer — keep it handy during the installation. The test

page will show the assigned IP address of the print server.

Print server’s

IP address

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 155 156

Žádné komentáře

Axis 540 Series Uživatelský manuál Strana 13