Axis 540 Series Uživatelský manuál stáhnout pdf (Strana 82)

Updating the Firmware

82 AXIS 540+ / AXIS 560 User’s Manual

7. If you do not have a default password, just click Next >. If some of your

servers use a different User ID or Password than the default entries, they will

be displayed in the Remaining servers list. Enter the User ID and Password

for each individual server. Click Next >.

8. Name the upgrade job. This is optional, so you can leave the field blank if

you want. Click the Start button to start the upgrading job.

9. You can view the progress of the job in the Event Log.

Refer to “Using AXIS ThinWizard for Print Server Management” on page

88, for more information about AXIS ThinWizard.

Upgrading using FTP To upgrade over the network using FTP you will need a file with the new

print server firmware. The name of this file is in the form

product_version.bin.

Ensure that FTP Enabled is set to yes. To check this parameter, browse to

the print server and select Admin | Network Settings | Detailed View |

TCP/IP Network.

The objective of this example is to upgrade a print server to firmware

version 7.00.

The description below from a typical Windows session uses the following

examples:

• Print server model: AXIS 540+

• IP address of print server: 10.13.4.105

• New firmware version name: 540p_v2_7_00.bin

• Location of firmware and upgrade procedure: c:\Axis

Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may

have to be re-initialized by your dealer.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 155 156

Žádné komentáře

Axis 540 Series Uživatelský manuál Strana 82