Axis BTA 2100D Návod k obsluze stáhnout pdf (Strana 372)

100

101

370

Item Description

poor operation but will not harm either the GC

or the AutoSampler.

AutoSampler, Syringe Speed 1 to 30 (cm/sec), default=30

The Injector Injection Speed parameters

define the rate at which the needle will

penetrate the injector septum and descend to

the set Injector Needle Depth.

AutoSampler, Needle Depth 0 to 100, default=100

The Injector Needle Depth parameters define

how far into the designated injector the needle

will penetrate. 100% causes the needle to be

completely inserted to its 2-inch length.

AutoSampler, Plunger Count Limit (1-100,000) – This parameter defines the

expected number of strokes the plunger is

expected to survive without significant

degradation. Once the entered value is

exceeded, a message will be displayed on the

CP-8400/8410 Status page indicating the

plunger counter has exceeded the set value.

The default number of strokes is 10,000.

AutoSampler, Enable Buzzer Buzzer at Start of Cycle (On/Off) – A sound

will be generated to warn of impending tower

movements when this parameter is set to On.

The default value is On.

AutoSampler, Calibrate

AutoSampler

Displays the 8400/8410 AutoSampler

Calibration Dialog Box.

Calibrate Autosampler Dialog Box

This dialog box helps the user to calibrate the 8400/8410 AutoSampler. Items

that are not active are "grayed" in the actual screen.

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 596 597

Komentáře k této Příručce

Žádné komentáře

Axis BTA 2100D Návod k obsluze Strana 372

Komentáře k této Příručce

Související produkty a manuály pro Software Axis BTA 2100D